Medallion mount (start/Stop cover)
Medallion mount (start/Stop cover)
Medallion Mount (Start/Stop defeat)
Elevate your Grenadier’s interior with this precision-crafted Medallion Mount.
Designed to fit seamlessly over the factory start/stop button, it adds a touch of rugged individuality while protecting the switch from daily wear and unnecessary operation.
Manufactured for a snug fit and finished with the no ubiquitous ^ this cover blends utility with style—making every engine start feel like a statement especially when you don't need to disable the start stop function.
Couldn't load pickup availability
Share
Collapsible content
Installation Instructions
1. Remove the 4 machine screws from the start/stop button location.
2. Position switch cover in place sot that the bosses engage with the existing counterbored holes.
3. Insert screws through the switch cover and into the console holes, noting that the longer sized screw should be used in the upper right hand corner. Tighten gently.
Warning, do not over tighten screws, 4in-lb (0.4N.m) max
Install with the engine running and the start/stop system active. Installing the cover will depress the start/ stop button, make sure to hold in place while tighten ing screws.
Install medallion prior to install in the vehicle for best results.
I found that it fitted well and worked for a while, but eventually the stop/start became active again. I added about 2mm thick rubber and some thin double-sided foam tape behind the mount and will see whether this works.
The medallion fits well and is a nice touch.
Easy to install, good quality and works well. I would prefer that the finish was a better match for surrounding factory surfaces.
